The P280 is a 2,048Wh capacity power station built around an array of 4,000+ recharge cycle, automotive-grade LiFePO4 cells that have a 10-year lifespan and a much better safety record than the older Li-ion cells.
This unit can push out 2,800W continuously (and support peak loads up to 5,600W) through its array of ports. It has five AC outlets, four USB-C ports (two rated for 20W max, the other two for 140W max), two 18W max USB-A ports, a 12V car output port, two 12V/3A DC5521 ports, and a single 12V/25A XT-60 port.
That’s a total of 15 ports in all, so all your devices – from your camping refrigerator and CPAP machine to your earbuds and drones – can get charged up from the one power station.
The AC output is enough to handle pretty much any mains-powered device you want to throw at it, making it a very versatile backup power solution.
Nice. I’ve got the Anker version but it’s half the capacity at 1 KWh. It charges exclusively from 800W of PV input (though it can only handle 600W input) and can push out 2,000 W continuous and 3000 peak.
I’ve got a splitter from the PV that goes to both the Anker and a DC-DC converter which then goes to a few 12v -> USB power delivery adapters. Those can use the excess from the PV to charge power banks, phones, laptops, etc while the rest goes to the Anker (doesn’t seem to affect the MPPT unless there’s basically just no sunlight at all). Without the splitter, anything above 600W is wasted until I expand my setup later this spring.
All I can say for it is that it absolutely rocks! On sunny days, I run my entire homelab from it, my work-from-home office, charge all my devices, and run my refrigerator from it if I feel like running an extension cord). It’s setup downstairs, so I also plug my washing machine into it and can get a few loads of laundry done as well.
All from its solar input.
