The only espresso grinders < $100 are probably going to be used or maybe Baratza brand. Baratza does sell many of the replacement parts online, but occasionally the designs get updated and older models can be hard to repair without having to change lots of internals. The models share a lot of their internal designs however and they are quite durable.
Hario makes some good simple hand grinders that you can get new burrs for. The skerton model can screw onto a mason / ball wide mouth jar if you break the glass canister.
There are plenty of good higher end grinders. I had a Rancilio Rocky that I got second hand, made in 1985, used multiple times daily for years and only needed a small repair to the Doser lever spring. I changed the burrs a couple of times and gave it to a friend and it’s still running perfectly as a 40 year old workhorse. Not fancy but quite solid. The only real weak point is some plastics on the case, but they sell replacements. The designs have been fairly maintained over the years and parts are available. I’m pretty sure that if I bought a new Rocky it would outlive me today.
Baratza’s lower models work ok when they are new but I wouldn’t call them durable. Hario Skerton is crap. If I can find mine, you can have it for free. I’ll give OP first dibs though, and will say I don’t recommend it except as a backup. Rancilio Rocky is a reasonable choice I guess.
What would you recommend that not Baratza for a, sub-$100 grinder that’s repairable and maintainable?
Baratza grinders are not the nicest grinders known, but they do sell every part and you can replace the burrs.
Like I recently sold a KitchenAid double burr grinder that runs double the price of a Baratza Encore. New burrs are not available and all the parts of the KA are breakable glass and unobtainable for repairs. That to me seems crazy, but the flip side is that a $60 Encore is a screaming deal at that price level, for the features of being 100% repairable.
Part cost is VERY reasonable and they ship cheap and fast
As far as I can tell, the top line Baratza models use the same gearbox and motor as the base models
Baratza will sell you the main circuit board for under $15 and the gear box rebuild for like $10. In my opinion that’s admirable. Talking like BIFL ethics, the company obviously wants you to be able to repair any issues, versus being disposable.
( Silly question: why do you own a Skerton, and why isn’t it broken?)
For espresso or drip?
The only espresso grinders < $100 are probably going to be used or maybe Baratza brand. Baratza does sell many of the replacement parts online, but occasionally the designs get updated and older models can be hard to repair without having to change lots of internals. The models share a lot of their internal designs however and they are quite durable.
Hario makes some good simple hand grinders that you can get new burrs for. The skerton model can screw onto a mason / ball wide mouth jar if you break the glass canister.
There are plenty of good higher end grinders. I had a Rancilio Rocky that I got second hand, made in 1985, used multiple times daily for years and only needed a small repair to the Doser lever spring. I changed the burrs a couple of times and gave it to a friend and it’s still running perfectly as a 40 year old workhorse. Not fancy but quite solid. The only real weak point is some plastics on the case, but they sell replacements. The designs have been fairly maintained over the years and parts are available. I’m pretty sure that if I bought a new Rocky it would outlive me today.
Baratza’s lower models work ok when they are new but I wouldn’t call them durable. Hario Skerton is crap. If I can find mine, you can have it for free. I’ll give OP first dibs though, and will say I don’t recommend it except as a backup. Rancilio Rocky is a reasonable choice I guess.
What would you recommend that not Baratza for a, sub-$100 grinder that’s repairable and maintainable?
Baratza grinders are not the nicest grinders known, but they do sell every part and you can replace the burrs.
Like I recently sold a KitchenAid double burr grinder that runs double the price of a Baratza Encore. New burrs are not available and all the parts of the KA are breakable glass and unobtainable for repairs. That to me seems crazy, but the flip side is that a $60 Encore is a screaming deal at that price level, for the features of being 100% repairable.
Is there a better $60 grinder you’re aware of?
https://www.baratza.com/en-us/landing/product/parts
Part cost is VERY reasonable and they ship cheap and fast
As far as I can tell, the top line Baratza models use the same gearbox and motor as the base models
Baratza will sell you the main circuit board for under $15 and the gear box rebuild for like $10. In my opinion that’s admirable. Talking like BIFL ethics, the company obviously wants you to be able to repair any issues, versus being disposable.
( Silly question: why do you own a Skerton, and why isn’t it broken?)